The 3-in-1 filling machine uses a stainless steel body, and the filling, lowering and capping are all completed at one time. It is mainly suitable for the filling and capping of food, beverages and daily chemical products. It can also be used for other special-shaped filling caps. Automatic filling, end-removing cap, end-removal screw cap sealing; select brand infinitely variable speed system, which can be Adjust the production speed; use a cam indexer to make the filling and lower cap positioning accurate, and the machine work smoothly; imported food-grade stainless steel to ensure that the product meets GMP specifications.
Open the air source to check each sealing surface, adjust the air pressure to 0.3~0.4MPa to adjust the oil intake, generally spray a drop of oil after several actions, and check the oil injection status regularly. Anti-drip filling system: The cylinder moves up and down during filling to drive the bulkhead. When the cylinder moves upwards, the head is upwards, that is, the valve opens, and the material is filled. When the cleaning is over, the control valve is closed, the motor stops rolling, the system recovers to its initial condition, and the next process begins.
This machine is mainly used for daily chemical filling operations. This machine combines the three functions of filling, lowering and capping on one body, and the whole process is automated. It is suitable for filling, heating and temperature control equipment for cosmetics, cream products, liquids, etc. It can also perform hot filling. Installed. The adjustment of the trial bottle shape of each part is completed by rolling the handle, which is easy, simple and convenient.
The filling method uses a new type of micro-pressure filling, which makes the filling speed faster and more stable, so compared with the same standard machine, the output value of this machine is higher and the benefit is greater. This machine uses an advanced programmable controller to control the active operation of the machine, and photoelectric detects the operation status of each component, so the degree of automation is high and the operation is simple.
